The Panopto Recorder allows a lot of flexibility in how and what you can record. A presenter may wish to record alone (with one computer) or with a videographer using a separate computer. This section will cover all aspects of recording with one computer. In this recording scenario, all presentation content (PowerPoint and/or screen capture) and video/audio is recorded from one computer.
The Panopto Recorder is very small and very easy to install. It can only be installed on computers using Windows XP, Vista, or 7 (32 and 64 bit). Your computer should also have a large amount of free drive space to capture your video/recording. You can find the complete installation instructions here: Recorder Install
Creators are able to log in to the Recorder with their credentials and record video, audio, PowerPoint presentations and also add Screen Capture functionality.
The first step in presenting from the Panopto Recorder is to open the application on your computer.
Start --> Programs --> Panopto --> Panopto Recorder
Once you've entered your Panopto Server Address, Login, and Password, click the Log In button. You may also choose to save your information by selecting the "Remember Me" box.
The first thing you can do is set what folder you wish to create this new recording in. Clicking on the icon will allow you to do just this. You can even create a new folder from here. This part is not required as you can record offline and select which folder after you have created the recording.
Once you have chosen your folder or are just recording offline, you must next choose exactly what you would like to record. You can select a video capture device such as a webcam or video camera. After that, you can also choose what you want to use to record your audio. This could be a microphone or even the same device as your video if it has a built in mic.
Note: You must select at least have audio or video in order for the recording to be complete and usable without additional recordings.
After you have selected your video and audio inputs, you can choose to also capture what is displayed on your screen and/or PowerPoint presentation.
You can also add an additional video source here if you have more than one camera plugged into your computer.
Note: In order to properly record PowerPoint presentations, after you have launched PowerPoint, you must have it in full screen presentation mode.
To adjust screen capture resolution simply click the drop down menu to the right of "Max Resolution" and choose the resolution you desire. You can also adjust the bit and frame rate per second by dragging the sliders shown below. Click Apply to save changes.
RECORD PAUSE STOP
Clicking on Stop will stop the recording and close it out. If you had picked a folder before you started, it will then begin to upload the recording to whatever folder you had chosen.
The Pause button will in a sense Pause your recording. However, everything Panopto does is non-destructive. Which basically means, even though you’ve paused your video, it will continue to record, but will not show up in the final version on the website. You can, however go into the editor and get this recorded time back if you, for example, forgot to un-pause and didn’t get the end of your recording.
Once everything has been recorded and you have stopped your recording, you will be taken to the recording status page which will show you something that looks like:
Offline Recordings are recordings that you have not yet picked a folder for, so they are just on your computer.
Currently Uploading will show the video that you just completed and it’s status.
Uploaded will show the recordings that you have already recorded, picked a folder for, and uploaded to the server.
You can see that it is possible to delete recordings. If they have been uploaded already, you can delete local and the recording will still be located on the server. If you delete a recording that has not yet been uploaded, that recording will be lost.